Company Details
  • Satis Machinery ( Ningbo ) Co., Ltd.

  •  [Zhejiang,China]
  • Business Type:Manufacturer , Trade Company , Service
  • Main Mark: Americas , Asia , East Europe , Middle East
  • Exporter:51% - 60%
  • Certs:CE, ISO9001:2000
  • Description:Fin Press,Fin Press Line,Fin Line
Satis Machinery ( Ningbo ) Co., Ltd. Fin Press,Fin Press Line,Fin Line

Fin Press Line

Share to:  
    Payment Type: L/C,T/T,D/P,Western Union,D/A
    Min. Order: 1 Bag/Bags
    Delivery Time: 80 Days

Basic Info

Model No.: SFL-45

Additional Info

Packaging: Steel

Productivity: 100 sets

Brand: SATIS

Transportation: Ocean,Land,Air

Place of Origin: CHINA

Supply Ability: 100 SETS

Certificate: ISO , CE

Product Description

Main characteristics of our Fin Press Line


Fin Press Line includes Fin Die and Fin Press , This die consistsof a drawing unit, pierce extrude, reflare, edge trim, slit, dual feed (fixedand movable), and cutoff station.

The fin surface is accomplished in the last draw station byremovable plate, The die stays in the press during plate changes. The diefurther features the latest version of draw station adjustment. Each stationcan be individual adjusted using a dial adjustment gauge.

The draw dials are calibrated, as is the reflare adjustmentdial. Our digital position indicator design will be included on all draw andreflare dials, which greatly improves the visibility and ease of adjustment.These features allow for extremely fast changes from one collar height settingto another.


We also will furnish ball bushings in the main die set asserviceable pillar style bearings.


Air is used in the pierce extrude station to clear slugsand scrub the walls of the extrude bushings. Air is also used in the edge trimstation to eject scrap.


PIERCE PUNCH LUBRICATION SYSTEM We provide the piece punchlubrication system to extra protect the punches and dies. This features areservoir and necessary plumping to induce air and lubricant through the piercepunches automatically. This will assist to remove the round pierced Slug pluslubricate the punch during entry and withdraw from the pierce dies. This isespecially necessary when running any type of evaporative fin stock lubricant.


QUICK DIE CHANGE Our fin line is designed and manufacturedfor rapid die exchange. One man with two hours will be enough for skilledoperator. Nearly all changes are of a fixed position nature to virtuallyeliminate adjusting things to get the dies running with the line.


SEPARATE SLIT ADJUSTMENT A set of slit design upper bladescan be positioned from 1,2,3,4,5,6,7,8 and more ........... row production.


SPEICAL TOOL STEEL (TOOLING) The die will be designed intooling items named ASP30, for example, Punches, Die inserts, Slitter bladesand other blades.


FIN PRESS The Satis 45/60 ton, [C" Frame SFL Press isspecifically designed for manufacturing heat transfer fins. The press utilizesan anti-friction bearing design that reduces the required running clearances.This precision is very important for high precision achievement. A programmablecontroller is used to control the press.

Vibration isolator machine mounts (4) pcs. are includedwhich eliminate the need for special foundations.

Automatic lubrication is provide which can lubricate everykey bearings, Guide ways and so on.


FIN STOCK UNCOILER The Uncoiler is designed of pinch rollfeed type. The stock coil inside diameter is 150mm, Outside diameter 1100 mmMax. coil weight is 1,000 Pounds


STOCK FAULT SENSOR This is a photo sensor system that willdetect both end of stock at the uncoiler and tight stock between the uncoilerand the lube tank.


STOCK LUBRICATOR We propose to furnish a tank dip typelubricator. The stock passes through the lubricant guided by rolls. Prior toleaving the tank, the stock passes through two stripping rolls which wipeexcess lubricant back into the tank. The low level shut-off is quoted toprotect the die in the event the stock lubricant runs out.


LUBRICATION LOW LEVEL SHUT OFF & WARNING SYSTEM A lowlevel detector will stop the press if fin stock lubricant is below a presetlevel.


LUBRICATOR AND STOCK GUIDE SUPPORTS This is a weldmentbracket to support the fin stock guide plus the fin lubricator.


UPPER SUCTION UNIT AND SUCTION PLATE The current standardupper suction unit consists of a fan driven by power. The suction capacity isadjustable via transducer. Higher capacity units and variable speed drives canbe designed upon request. Optional double blower units are also available forextreme material and part design conditions and 36" long fin.


FIN STACKER, 2 POSITION SHUTTLE We would propose thesuction drop to rod type fin stacker as 2 position shuttle (trolley) design .Using a counter on the press, the press will stop when a predetermined amountof fins have been countered out by the press.


SINGLE ROW FIN OPTION Single row fins is an option for yourhigh efficient manufacturing purpose. A fin blow down unit is used to assist topush the fins away from the suction drop. It is important with enhanced finconfigurations which are very light and tend to not release from the suctiondrop properly.


SCRAP AND TRIM COLLECTION UNIT Scrap tanks are furnished tobe used for scrap collection for convenient operation


TESTING MATERIALS In order to provide convenience for customers,Supplier can buy some testing material on behalf of customer in China Pleasecontact us if you need any more detailed information.

Looking for ideal Fin Press Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Fin Press Line are quality guaranteed. We are China Origin Factory of Fin Line. If you have any question, please feel free to contact us.

Product Categories : Finned Tube Coil Fabrication Machinery > Fin Press Line

Product Images
  • Fin Press Line
  • Fin Press Line
  • Fin Press Line
Email to this supplier
  • *Subject:
  • To:
    David Xu
    Mr. David Xu
    Chat Now
  • *Messages:
    Your message must be between 20-8000 characters

Mobile Website Index. Sitemap


Subscribe To Our Newsletter:
Get Updates, Discounts, Special
Offers and Big Prizes!

MultiLanguage:
Copyright © 2018 Satis Machinery ( Ningbo ) Co., Ltd. All rights reserved.
Communicate with Supplier?Supplier
David Xu Mr. David Xu
What can I do for you?
Chat Now Contact Supplier