Inquiry Basket ( 0 )
Company Details
  • Satis Products Co., Ltd.

  •  [Zhejiang,China]
  • Business Type:Manufacturer , Trade Company , Service
  • Main Mark: Americas , Asia , East Europe , Middle East
  • Exporter:51% - 60%
  • Certs:CE, ISO9001

Satis Products Co., Ltd.

Title
  • Title
  • All
Home > Recommended
Online Service

Professional China for Manual Hairpin Bender Mechanical Hairpin Bender export to Cameroon Exporter

Share to:  
    Incoterm: FOB
    Min. Order: 1 Set/Sets
    Delivery Time: 90 Days
  • Product Detail
  • Product Tags
  • Buyer Reviews

Our firm since its inception, normally regards item top quality as company life, constantly make improvements to generation technology, improve product excellent and repeatedly strengthen organization total good quality management, in strict accordance with the national standard ISO 9001:2000 for Auto Hairpin Bender,Automatic Hairpin Bender,Hairpin Bender Machine. please get in touch with us freely.

Professional China for Manual Hairpin Bender Mechanical Hairpin Bender export to Cameroon Exporter

Mode: SHP8-2500

Specification of SHP Hairpin bender

Tube specification: 4 * 3/8" & 4* 1/2"

Length of hairpin: 200-2500

Material: Copper

Structure & operation:

SHP8-2500 Model hairpin bender quoted here consist of:

1. Powered uncoiler station

2. A changeable rerounding & straightening system to allow for further diameter changes.
The rounding & straightening wheels are set on both the vertical and horizontal plane,
which will straight the tubes from the 2 plates. Each tube has 2 rounding wheels and 12 straighten wheels


The feeding system is a hydraulically driven friction feeding device, with air cylinders
controlling the actual pressure applied to the individual feed belts. When
feeding, individual air cylinders will apply proper pressure to each of the
belts. The upper and bottom belts will clamp one copper tube and feed to proper
length.when the proper length is almost achieved. The feeding speed will change
from fast to slow, and the air cylinder pressure on the belt will change from
high to low. Each air cylinder will lose almost all pressure when the tube it
is feeding reaches the final proper position against a Hard Stop plate. It will
hold that tube in place until all tubes have achieved the final proper
position. Thus all hairpin ends are in the same final location assuring both
the consistence of hairpin length and equality of leg lengths

3. A fixed location cutting system

The copper tubing cutting system utilizes outer rotating cutter blades to cut the tube. Lubrication takes place.
The feed belts reverse and separate the tube ends after cutting.

4. A Bending system

The bending system can move in
the length direction to produce hairpin of different lengths. The leg length is
set from the PLC and Programming is fully automatic


The bend system is servo driven.
This is allows for much better accuracy and less free play or back lash then the older type of
hydraulically driven bending heads found in many competitor's units.


5 In addition:
"Quick
Change" Tube support booms are provided to support the guide tubes and
allow change from one length to another in less than 2 minutes

The Hairpinbender will be capable of receiving such special sets of bend tooling as may be
dictated by specific bend radius requirements and / or changes in tubing
diameter up to16mmmaximum.

A sensingdevice is provided in each lubrication tank to monitor the level of oil to
prevent operating the equipment without proper lubrication. A corresponding
diagnostic message will be displayed on the touch screen when the level is low


An tube pickoff device is included which will support the tubes while stripping and lay
them down in the tube collectors. This will produce straighter hairpins for
longer lengths


There is a tube end Sizer attachment to reopen the ends of the hairpins
that do not pass
over the mandrels

Automatic setup of the hairpin bender and leg length adjustments can be accomplished
through the use of a standard programmable controller interfaced with a touch
screen. This also provides diagnostic information for trouble shooting, Semi-automatic
control and manual actuation of all machine functions.

Additionally, The machine is capable of
automatically positioning to specific hairpin
length. Both legs of hairpin are adjustable through
the touch screen and can be moved
either independently or together by dedicated servo
motors. The motors are capable of
running at both fast and slow speeds to decrease
setup time and facilitate precision
adjustments. Over-travel switches on each axis help
protect the machine with digital
readouts on the touch screen display the current and
target location in increments of
0.1mm. After the target location on each axis has been
reached, hydraulic clamps lock in
place to prohibit drifting.

Cable/hose carriers are provided to the back of the machine and the switch tower area to
prevent hose and cable damage and imprve the general esthetic of the equipment


Industry standard assemblies are also supplied-such as

1. Stripper tube pro


Please contact us if you need any more detailed information.


Thank you

"owing to very good company, a variety of top of the range merchandise, competitive charges and efficient delivery, we take pleasure in a very good track record amongst our clients. We've been an energetic organization with wide market for Mechanical Hairpin Bender. The product will supply to all over the world, such as: Heard and Mc Donald Islands,Libyan Arab Jamahiriya,French Polynesia. "We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success.

Email To This Supplier

Your message must be between 20-8000 characters

YOU MAY LIKE

Communicate with Supplier?Supplier
David Xu Mr. David Xu
What can I do for you?
Chat Now Contact Supplier