SATIS MACHINERY CO., LTD.

Products

Home > Products > Finned Tube Coil Fabrication Machinery > Hairpin Bender > automatic hairpin bender machine

automatic hairpin bender machine

Min. Order:
1 Bag/Bags
Share:
Chat Now
  • Product Description
Overview
Product Attributes

Model No.3500-8

BrandSATIS

Supply Ability & Additional Information

PackagingStrong

Place of OriginCHINA

Supply Ability2

CertificateCE

Packaging & Delivery
Selling Units:
Bag/Bags
Package Type:
Strong

We have different Mechanical Hairpin Bender Machine mode for 6 tubes per cycle, 8 tubes per cycle from 200mm to 4000mm length application


HP8-3500 Model Mechanical Hairpin Bender Machine here consist of:


1.Motor Driving uncoiler station


2. A changeable rerounding & straightening system to allow for further diameter changes.


2.1The rounding & straightening wheels are set on both the vertical and horizontal plane, which will straight the tubes from the 2 plates. Each tube has 2 rounding wheels and 12 straighten wheels


2.2 The Mechanical Hairpin Bender Machine feeding system is a hydraulically driven friction feeding device, with air cylinders controlling the actual pressure applied to the individual feed belts. When feeding, individual air cylinders will apply proper pressure to each of the belts. The upper and bottom belts will clamp one copper tube and feed to proper length. when the proper length is almost achieved. The feeding speed will change from fast to slow, and the air cylinder pressure on the belt will change from high to low. Each air cylinder will lose almost all pressure when the tube it is feeding reaches the final proper position against a Hard Stop plate. It will hold that tube in place until all tubes have achieved the final proper position. Thus all hairpin ends are in the same final location assuring both the consistence of hairpin bend length and equality of leg lengths


3. A fixed location cutting system of hairpin bender The copper tubing cutting system utilizes outer rotating cutter blades to cut the tube. Lubrication takes place. The feed belts reverse and separate the tube ends after cutting.

4. Hairpin Bender Bending system The bending system can move in the length direction to produce hairpin of different lengths. The leg length is set from the PLC and Programming is fully automatic The hairpin bender system is servo driven. This is allows for much better accuracy and less free play or back lash then the older type of hydraulically driven bending heads found in many competitor's units.

5 In addition:

5.1"Quick Changer" of hairpin bender Tube support booms are provided to support the guide tubes and allow change from one length to another in less than 2 minutes

5.2 Mechanical Hairpin Bender Machine will be capable of receiving such special sets of bend tooling as may be dictated by specific bend radius requirements and / or changes in tubing diameter up to 16mm maximum.


5.3 A sensing device is provided in each lubrication tank to monitor the level of oil to prevent operating the equipment without proper lubrication. A corresponding diagnostic message will be displayed on the touch screen when the level is low

5.4 An tube pick off device is included which will support the tubes while stripping and lay them down in the tube collectors. This will produce straighter hairpins for longer lengths There is a tube end Sizer attachment to reopen the ends of the hairpins that do not pass over the mandrels

Please contact us freely if you want any more details for hairpin bender, or Automatic hairpin bender Highest quality with perfect performance hairpin bender will value your production.

Please contact us freely if you are interested in our Mechanical Hairpin Bender Machine

Product Categories : Finned Tube Coil Fabrication Machinery > Hairpin Bender

Email to this supplier
  • *Subject:
  • *To:
    Mr. David Xu
  • *Email:
  • *Message:
    Your message must be between 20-8000 characters

Home > Products > Finned Tube Coil Fabrication Machinery > Hairpin Bender > automatic hairpin bender machine

Send Inquiry
*
*

Send Inquiry

Tel:86-574-83023019

Fax:86-574-87489428

Mobile Phone:+8613615883733Contact me with Whatsapp

Email:info@satismachinery.com

Address:2# Xinheng Yizhilu, Cicheng Industry Park, Jiangbei Dist. 315036 , Ningbo, Zhejiang

Mobile Site

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send